Brocade FastIron Ethernet Switch IP Multicast Configuratio Manuale Utente Scaricare il pdf (Pagina 224)

show ip multicast optimization

Displays Internet Group Management Protocol (IGMP) snooping hardware resource-sharing

information. You can configure it to display the availability of IP multicast (IPMC) group indexes in the

hardware and how it is been used and shared.

Syntax

show ip multicast optimization [ ipmc ]

Parameters

ipmc

Specifies the IPMC group index.

Modes

Privileged EXEC mode

Usage Guidelines

NOTE

The show ip multicast optimization command is available only on ICX 7750 devices.

Examples

This example displays resource information showing that IPMC group index 4 is shared by two users

and the ports included in the set are 1/1/6 and 1/1/1:

Device(config-vlan-150)#show ip multicast optimization

Total IPMCs Allocated: 0; Available: 8192; Failed: 0

Index IPMC SetId Users Set

1. 4 0x161fcbd8 2 {<1/1/6>,<1/1/1>,}

2. 1 0x161d0930 10 {<1/1/6>,<1/1/4>,<1/1/3>,<1/1/2>,

<1/1/1>,}

Sharability Coefficient: 76%

History

Release version Command history

8.0.10 This command was introduced.

show ip static mroute

Displays information for configured multicast routes.

Syntax

show ip static mroute [ vrf vrf-name ] ip-subnet mask

Parameters

vrf vrf-name

Specifies a VRF route.

ip-subnet [ mask ]

Specifies an IP address.

Modes

Privileged EXEC mode

Usage Guidelines

Only resolved and best static mroutes are added to the mRTM table. These routes are prefixed with an

asterisk in the output from the show ip static mroute command.

show ip multicast optimization

222 FastIron Ethernet Switch IP Multicast Configuration Guide

53-1003085-02

1 2 ... 219 220 221 222 223 224 225 226 227 228 229 230

Commenti su questo manuale

Nessun commento

Brocade FastIron Ethernet Switch IP Multicast Configuratio Manuale Utente Pagina 224

Commenti su questo manuale

Prodotti e manuali riguardandi Accessori per computer Brocade FastIron Ethernet Switch IP Multicast Configuratio