Brocade Network OS Command Reference v4.1.0 Manuale Utente Scaricare il pdf (Pagina 121)

Network OS Command Reference 83

53-1003115-01

class

NOTE

The cir and cbs parameters are the mandatory for configuring a class-map. Other parameters are

optional. If optional parameters are not set then they will be treated as disabled. To delete the

mandatory cir or cbs parameters, you must delete all Policer parameters while in the policy-map

class configuration mode using the no police command.

NOTE

This command is only supported on Brocade VDX 8770-4, VDX 8770-8, and later switches.

Examples This example configures a class-map called “default” within a policy-map.

switch# configure terminal

switch(config)# policy-map policymap1

switch(config-policymap)# class default

switch (config-policymap-class)# police cir 40000

switch(config-policymap-class-police)# cbs 50000

switch(config-policymap-class-police)# eir 800000

switch(config-policymap-class-police)# ebs 400000

switch(config-policymap-class-police)# conform-set-tc 3

switch(config-policymap-class-police)# exceed-set-prec 4

See Also cbs,conform-set-dscp, conform-set-prec, conform-set-tc, ebs, eir, exceed-set-dscp,

exceed-set-prec, exceed-set-tc, police cir, police-priority-map, policy-map, qos cos, service-policy,

set-priority

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 140 141

Nessun commento

Brocade Network OS Command Reference v4.1.0 Manuale Utente Pagina 121