Brocade Network OS Command Reference v4.1.0 Manuale Utente Pagina 43
- Pagina / 141
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Network OS Command Reference 5
53-1003115-01
Network OS CLI command modes
1
Routing
protocol
configuration
BGP:
switch(config)#
switch(config-rbridge-id-1)#
switch(config-/jointfilesconvert/1441111/bgp-router)#
BGP route-map configuration mode:
switch(config-rbridge-id-1)#
switch(config-route-map-
myroutemap/permit/1)#
BGP address-family IPv4-unicast mode:
switch(config-/jointfilesconvert/1441111/bgp-router)#
switch(config-/jointfilesconvert/1441111/bgp-ipv4u)#
From global configuration mode, specify
an RBridge ID to enter RBridge ID
configuration mode.
From RBridge ID configuration mode,
use the router /jointfilesconvert/1441111/bgp command to enter
BGP configuration mode.
From RBridge ID configuration mode,
use the route-map command with a
permit or deny statement and an
instance number to enter BGP
route-map configuration mode,.
From BGP configuration mode, use the
address-family ipv4 unicast command to
enter BGP address-family IPv4 unicast
configuration mode.
Configure Border
Gateway Protocol
routing protocol
OSPF VRF:
switch(config)# rbridge-id 5
switch(config-rbridge-id-5)#router
ospf
switch(config-router-ospf-vrf-default
-vrf)#
From RBridge ID configuration mode,
use the router ospf command to enter
OSPF VRF configuration mode.
Configure Open Short
Path First routing
protocol
PIM:
switch(config)# rbridge-id 5
switch(config-rbridge-id-5)#router
pim
switch(conf-pim-router)#
From Bridge ID configuration mode, use
the router pim command to enter PIM
configuration mode.
Configure Protocol
Independent Multicast
routing protocol
Virtual-router-
group
configuration
mode
switch(config)# rbridge-id 101
switch(config-rbridge-id-101)# int ve
25
switch(config-ve-25)#
vrrp-extended-group 1
switch(config-vrrp-extended-group-1)#
From RBridge ID configuration mode,
use the int ve command to enter VE
configuration mode. Then use the
vrrp-extended-group command to enter
virtual-router-group configuration mode.
DCB feature
configuration
CEE map:
switch(config-cee-map-default)#
Standard ACL:
switch(config-macl-std)#
switch(config-ip-std)#
Extended ACL:
switch(config-macl-ext)#
switch(config-ip-ext)#
From global configuration mode, specify
a DCB feature by entering one of the
following commands:
• cee-map default
• mac access-list standard
• mac access-list extended
• ip access-list standard
• ip access-list extended
Access and configure
CEE map features.
ELD
configuration
mode
switch(config)# protocol
edge-loop-detection
switch(config-eld)#
From global configuration mode, enter
the protocol edge-loop-detection
command.
Configure edge loop
detection.
Network OS CLI command modes (Continued)
Command mode Prompt How to access the command mode Description
- Network OS 1
- Document History 2
- Contents 5
- 53-1003115-01 10
- About This Document 33
- What’s new in this document 34
- Document conventions 35
- Notes, cautions, and warnings 36
- Key terms 36
- Notice to the reader 37
- Additional information 37
- Getting technical help 38
- Document feedback 38
- Using the Network OS CLI 39
- Default roles 40
- Network OS CLI command modes 41
- • cee-map default 43
- • mac access-list standard 43
- • mac access-list extended 43
- • ip access-list standard 43
- • ip access-list extended 43
- • police-priority-map mapname 44
- • class-map mapname 44
- • policy-map mapname 44
- Keystroke Description 46
- Output modifier Description 48
- Network OS Commands 51
- Welcome to NOS CLI 89
- See Also None 107
- See Also interface 109
- 102/4/1 142
- Examples None 147
- [Y/N]: Y 199
- LACP rx debugging is on 229
- LACP tx debugging is on 229
- See Also show debug lldp 231
- MSTP debugging status: 235
- Te 0/1 rx is on 236
- Te 0/1 tx is on 236
- See Also show diag setcycle 265
- Self tests enabled 325
- Service instances out of sync 351
- HA is disabled 351
- Active Standby Active Standby 353
- All service instances in sync 354
- "mycommunity" 383
- • Simple text password 411
- • MD5 authentication 411
- • No authentication 411
- • Timeout: 5 seconds 453
- • Port: 389 453
- • Retries: 5 453
- port 3890 454
- domain security.brocade.com 454
- • Source MAC address 479
- • Destination MAC address 479
- • EtherType 479
- See Also traceroute 576
- PGID PG% PFC Description 595
- DSCP Values User Priority 626
- Traffic Class: 636
- 10:00:00:05:1e:00:69:00 680
- LDAP CA 737
- LLDP debugging status: 759
- VRRP event debugging is on 762
- See Also diag post enable 773
- Shutdown-time (minutes): 0 784
- Hello-time (msec): 1000 784
- Root of the Multicast-Tree 809
- ========================== 809
- Src Src Nbr Nbr Nbr 814
- −1, which specifies the 815
- See Also fabric route mcast 825
- See Also fcoe-enodes 830
- Name DCB-Map FABRIC-MAP(s) 833
- 10:00:00:05:1e:7a:c3:00 834
- FIPS Selftests: Enabled 838
- Root account: Disabled 838
- Firmware version history 839
- Rid 1: INSTALLING 841
- Rid 3: COMMITING 841
- Rid 4: COMMITED 841
- See Also show interface 906
- RP: 10.10.10.1, v2 932
- Rbridge-Id LicenseId 946
- 2 10:00:00:05:1E:00:4C:80 946
- Usage Guidelines None 948
- See Also linecard, show slots 964
- M2 VACANT 965
- 030200 030500 030800 967
- • Login name of the user 978
- • Client IP address 978
- • The time the user logged in 978
- Port (count) (count) (count) 991
- Te 1/1 2 1 3 No Restrict 2 No 991
- PROM access Enabled 1000
- 5 Off Off Off Off 0 1002
- 6 Off Off Off Off 0 1002
- See Also cee-map (FCoE) 1004
- Dropped Counts 1011
- 0/0 0 0 0 0 1011
- See Also qos red profile 1013
- RBRIDGE SWBD 1015
- ID NUMBER V4 V6 1015
- 1015
- 154 95 - 1015
- To display the RMON events: 1025
- See Also ip policy route-map 1028
- See Also show ag, show ag map 1037
- fabric isl enable 1058
- fabric trunk enable 1058
- mtu 2500 1063
- priority-tag 1065
- sflow enable 1068
- sflow polling-interval 10 1068
- sflow sample-rate 100 1068
- no shutdown 1069
- switchport 1070
- switchport mode access 1070
- switchport access vlan 1 1070
- dot1x authentication 1077
- dot1x port-control auto 1078
- dot1x quiet-period 120 1078
- dot1x reauthMax 5 1078
- dot1x reauthentication 1078
- secure port 6514 1129
- conform 0 1 1 2 1 2 1 1 1134
- exceed 3 3 3 3 4 5 6 7 1134
- To display a single rule: 1162
- When SSH service is enabled: 1172
- member-zone zone1 1187
- member-zone zone2 1187
- NAS Traffic 1192
- ATTENTION 1203
- Instance: 1; VLANs: 100 1212
- MSTI Bridge Priority: 32768 1213
- 0 DIS DSC 2000 128 1 1215
- UDLD Global Information 1231
- Heading Description 1232
- See Also protocol udld 1233
- Description UDLD headings 1233
- Example 1 1236
- ("Distributed"): 1237
- Example 3 1238
- Example 4 1238
- See Also vcenter 1250
- See Also show spanning-tree 1279
- • Displaying SSH sessions 1294
- • Deleting stale SSH keys 1294
- (<string>): ***** 1306
- To create a mapping: 1337
- To delete the mapping: 1337
- To change the domain name: 1337
- See Also route-map 1340
- • Display Telnet sessions 1345
- See Also rbridge-id 1353
- See Also vrrp-group 1364
- Password: ***** 1369
- USB storage enabled 1372
- USB storage disabled 1372
- Command Command Behavior 1384
- Virtual IP :10.21.87.2/20 1393
- Associated rbridge-id : 2 1393
- • When a switch boots up 1402
Prodotti e manuali riguardandi Accessori per computer Brocade Network OS Command Reference v4.1.0
Accessori per computer Brocade Multi-Service IronWare Software Defined Networking Manuale Utente
(44 pagine)
(44 pagine)
Accessori per computer Brocade Multi-Service IronWare Security Configuration Guid Manuale Utente
(370 pagine)
(370 pagine)
Accessori per computer Brocade Unified IP MIB Reference (Supporting FastIron Rele Manuale Utente
(771 pagine)
(771 pagine)
Accessori per computer Brocade Multi-Service IronWare QoS and Traffic Management Manuale Utente
(226 pagine)
(226 pagine)
Accessori per computer Brocade Multi-Service IronWare Switching Configuration Gui Manuale Utente
(984 pagine)
(984 pagine)
Accessori per computer Brocade 6910 Ethernet Access Switch Configuration Guide (S Manuale Utente
(124 pagine)
(124 pagine)
Accessori per computer Brocade Multi-Service IronWare Multicast Configuration Gui Manuale Utente
(216 pagine)
(216 pagine)
Accessori per computer Brocade NetIron CER 2000 Series Hardware Guide (Supporting Manuale Utente
(110 pagine)
(110 pagine)
Accessori per computer Brocade Multi-Service IronWare Routing Configuration Guide Manuale Utente
(846 pagine)
(846 pagine)
Accessori per computer Brocade ICX 6610 Stackable Switch Hardware Installation Gu Manuale Utente
(108 pagine)
(108 pagine)
Accessori per computer Brocade ICX 6450 Stackable Switches Hardware Installation Manuale Utente
(116 pagine)
(116 pagine)
Accessori per computer Brocade Multi-Service IronWare Administration Guide (Suppo Manuale Utente
(432 pagine)
(432 pagine)
Accessori per computer Brocade Converged 10GbE Switch Module for IBM BladeCenter Manuale Utente
(12 pagine)
(12 pagine)
Accessori per computer Brocade ICX 6430-C Compact Switch Hardware Installation Gu Manuale Utente
(64 pagine)
(64 pagine)
Accessori per computer Brocade ICX 6450-C Compact Switch Hardware Installation Gu Manuale Utente
(64 pagine)
(64 pagine)
Accessori per computer Brocade Multi-Service IronWare Multiprotocol Label Switch Manuale Utente
(852 pagine)
(852 pagine)
Accessori per computer Brocade FCoE Switch Module for IBM BladeCenter Installatio Manuale Utente
(76 pagine)
(76 pagine)
© 2020, manymanuals.it. Tutti i diritti riservati | 0.038 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale